Katselet kuluttajille tarkoitettua sivua
– nähdäksesi ammattilaisille tarkoitetun sivun,klikkaa tästä
Tuotenro. 710521
KÄHRS SATIN LACQUER 1,0 L LAKKA
Kährs lakka silkinhimmeä 1,0 l
Vesiohenteinen
Etsi jälleenmyyjä
Suosittelemme tutustumista lattioihimme Kährs-jälleenmyyjän luona. Esillä olevien mallien määrä vaihtelee jälleenmyyjittäin. Huomioitava, että pienessä mallipalassa ei voida tuoda esiin kaikkea lattian ulkonäön vaihtelua.
Tuotetiedot
| Pakkauksen mitat | |
| Leveys | 80 mm |
| Pituus | 80 mm |
| Volume | 1 l |
| Korkeus | 260 mm |
| Faktat | |
| Mallisto | Korjaustuotteet |
| Lisävarusteen alatyyppi | Maintenance |
| Lisävarusteen tyyppi | Hoito ja ylläpito |
| Pintakäsittely | Lakka |
| How to use | The surface to be finished must be carefully sanded and free of dust, dirt and other foreign materials. Depending on the level of wear on the old surface, this could be done either by screening or by sanding down the surface. The temperature of the floor should not be below 14°C nor exceed 28°C. Ideal is a 20°C floor temperature and a relative humidity of 55%. Shake the container before use, open and allow time for air to vaporize prior to application. Always test the finish on a smaller area to ensure colour and adhesion. Apply with roller, brush or applicator. 1. Screening: Recommended application: 1 coat, coverage 0,1 l/m2 2. Sanding down: Recommended application: 2-3 coats. Buff/screen the floors after first coat. Minimum recommended thickness for coverage is 0,25 l/m2, total amount. Drying time On bare floors: 30-60 minutes Succeeding coats: 2-4 hours Be very careful when using the surface during the first four weeks. |
| Ainesosat | Bonding agent: Polyurethane dispersion Viscosity: 28s (FC 4, 20°C) Solids by volume: 32% Approx. weight: 1,1 kg/l |