Art.nr 710523
KÄHRS REMOVER
For preparing a Kährs floor for recoating. Purpose is to take off dirt/grease and/or Kährs Lacquer Refresher. Can be applied with a Kährs mop. Available in 1 litre.
Maintenance
Maintenance
Safety Information
Hazard pictograms
Signal word
Warning
Hazard statements
H319
Causes serious eye irritation. (H319)
Precautionary statements
P280
Wear eye protection/protective gloves/protective clothing. (P280)
P264
Wash hands thoroughly after handling. (P264)
P102
Keep out of reach of children. (P102)
P101
If medical advice is needed, have product container or label at hand. (P101)
P305+P351+P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (P305+P351+P338)
P337+P313
If eye irritation persists: Get medical advice/attention. (P337+P313)
Ingredients
Non-ionic surfactants 5-15% Ethoxylated hydrocarbons, <5% NTA
(Nitrolotriacetic acid, trisodium salt, monohydrate)
Non-flammable
(Nitrolotriacetic acid, trisodium salt, monohydrate)
Non-flammable
Safety data sheets
Safety Data Sheet - Kährs Remover(en)Product Facts
| Packaging dimensions | |
| Width | 80 mm |
| Length | 80 mm |
| Item Height | 260 mm |
| Facts | |
| Collection | Cleaning and maintenance |
| Accessory Sub-type | Maintenance |
| Accessory type | Maintenance |
| How to use | Spread out the mixture with a sponge or cloth. Use as little mixture as possible. Allow to react for a few minutes and then work in with a scrubbing brush. Wash the floor with clean water with a slightly damp cloth. Use as little water as possible. Be careful with beech wood species, because too much moisture might damages the short ends of boards or strips. |
| Ingredients | Non-ionic surfactants 5-15% Ethoxylated hydrocarbons, <5% NTA (Nitrolotriacetic acid, trisodium salt, monohydrate) Non-flammable |
Product Facts
| Packaging dimensions | |
| Width | 80 mm |
| Length | 80 mm |
| Item Height | 260 mm |
| Facts | |
| Collection | Cleaning and maintenance |
| Accessory Sub-type | Maintenance |
| Accessory type | Maintenance |
| How to use | Spread out the mixture with a sponge or cloth. Use as little mixture as possible. Allow to react for a few minutes and then work in with a scrubbing brush. Wash the floor with clean water with a slightly damp cloth. Use as little water as possible. Be careful with beech wood species, because too much moisture might damages the short ends of boards or strips. |
| Ingredients | Non-ionic surfactants 5-15% Ethoxylated hydrocarbons, <5% NTA (Nitrolotriacetic acid, trisodium salt, monohydrate) Non-flammable |
Safety Information
Hazard pictograms
Signal word
Warning
Hazard statements
H319
Causes serious eye irritation. (H319)
Precautionary statements
P280
Wear eye protection/protective gloves/protective clothing. (P280)
P264
Wash hands thoroughly after handling. (P264)
P102
Keep out of reach of children. (P102)
P101
If medical advice is needed, have product container or label at hand. (P101)
P305+P351+P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (P305+P351+P338)
P337+P313
If eye irritation persists: Get medical advice/attention. (P337+P313)
Ingredients
Non-ionic surfactants 5-15% Ethoxylated hydrocarbons, <5% NTA
(Nitrolotriacetic acid, trisodium salt, monohydrate)
Non-flammable
(Nitrolotriacetic acid, trisodium salt, monohydrate)
Non-flammable
Safety data sheets
Safety Data Sheet - Kährs Remover(en)